Standard Discharge spouts are fabricated in various gauges proportionate to the thickness of the conveyor housing. They are generally furnished welded to the housing but may also be furnished loose for attachment in the field. Bottom flanges of the spout are drilled with standard discharge bolt pattern for interchange ability and convenient assembly.
Standard Discharge With Hand Slide Gate. The slide gate assembly is bolted directly to the discharge flanges. The slide may be positioned for opening from either side or for opening parallel to the conveyor.
Flush End Discharge is designed for use at the final discharge point. The end of the spout is comprised of a housing end with bottom flange drilled with standard discharge flange bolt pattern. Because it is located at the extreme end of the conveyor, there is no carryover of material past the final discharge point. The flush end arrangement eliminates the unnecessary extension of trough and interior components beyond the actual discharge point.
Rack & Pinion Gate With Flat Slide is designed for use with standard spouts. It bolts directly to the spout flanges. The flat slide is actuated by one or more pinions which mesh with racks bolted to the slide bottom. The gate may be operated by hand, chain or rope wheel. This unit is also available with pneumatic actuator.
Rack & Pinion Gate With Curved Slide is similar to the flat slide unit except that the slide is contoured to match the conveyor housing. The curved slide eliminates the “pocket” formed in the flat slide discharge assembly. The unit is also available with hand, chain or rope wheel. It may also be furnished with pneumatic actuator.
Dust-Tight Rack & Pinion Gate is available with flat or curved slide. The dust tight rack & pinion gate is furnished completely enclosed. This unit may be operated by hand, chain or rope wheel or may be furnished with pneumatic actuator.
