Newton Conveyors’ Steel Spring Clamps are manufactured from heavy gauge steel with precision dies.  Clamps are of the pivot type and are attached to the conveyor housing top flange by means of rivets, clamps are also available with weld on brackets.  Designed for attaching flat covers, the spring clamps are adjustable and may be used with covers having rubber or other types of gaskets. 

Conveyor Size

Part #

# Required Per 10’ Section

A

B

  C

   D

  E

F

  G

  H

K

4” to 24”

CFC-1

     14

 3

1

1-1/4

1-7/8

5/16

1

1/4

9/32

1/8

Screw Clamp

Steel Screw Clamps may be used with flanged or flat covers for all conveyor sizes through 24”.  Screw clamps provide a simple, yet completely secure, means of attaching covers

Conveyor Size

Part #

Clamp Size

# Required Per 10’ Section

   A

   B

  C

   D

  E

4” to 24”

CFS-1

    1

  14

2-3/8

   1

   1

1-5/8

1/4

Toggle Clamp

Toggle Clamps are desinged for attaching covers to conveyors where quick accessibility is required.  the toggle clamp is attached by welding the front or top of the base to the conveyor.  The hold down bar moves a full 90 degrees to clear the working area.  Adjustable spindle allows adjustment for all conveyor sizes.  Plastic handle moves 50 degrees.  the clamp provides a holding pressure of 800 lbs., yet weighs less than a pound

Conveyor Size

Part #

# Required Per 10’ Section

    A

    B

     C

  D

  E

  F

  G

4” to 24”

CFT-1

   6 to 8 

7-13/16

2-15/16  

1-25/32

   2

1-1/4

5/16

5/8

Screw Conveyors

Newton Conveyors’ Home 

Drag Conveyors

Online Catalog

Phone  817-558-1768  Fax      817-558-2219

Mail To:                Newton Conveyors, Inc. P. O. Box 816     Cleburne, Tx 76033

Deliveries:                        Newton Conveyors, Inc. 1204 C.R. 1123      Cleburne, Tx 76031