Seals

Plate Seal is an economical, effective sealing device designed for exterior mounting between the end bearing and the conveyor housing end.  Standard units include lip type seals, but other types of commercial seal cartridges may also be used.  The plate seal and the end bearing are attached by means of common bolts.  The plate may also be attached independently when outboard bearing ends are used.

Split Gland Seal is designed for interior mounting and provides an effective seal by compression of the packing which is contained in a split housing to facilitate assembly and replacement of the packing material.  Packing pressure may be adjusted by means of two exposed nuts at the top half of the seal housing.

Packing Seal Housing is a universal type seal designed for use with waste packing or cartridge type lip or felt seal.  An opening at the top of the housing facilitates waste repacking.  The packing material is partially exposed for oiling.  The packing seal housing is mounted outside between the end bearing and the conveyor end.  It may also be mounted independently for use with the outboard bearing end.

Packed Gland Seal is highly effective means of sealing the conveyor both internally and externally.  This seal also is suitable for pressure or vacuum service.  Mechanical compression of the packing material is accomplished by means of two compression bolts.  Available in two types, weld on or bolt on.  Designed for use with outboard bearing ends.

Screw Conveyors

Newton Conveyors’ Home 

Conveyor Screws

Index Page

Bucket Elevators

Reps Wanted

Drag Conveyors

Online Catalog

Phone  817-558-1768  Fax      817-558-2219

Mail To:                Newton Conveyors, Inc. P. O. Box 816     Cleburne, Tx 76033

Deliveries:                        Newton Conveyors, Inc. 1204 C.R. 1123      Cleburne, Tx 76031